Endura-Clad® Coating Systems Selector

visit allfrom1supply.com

Walls & Imaging Systems

The following Wall & Imaging systems have been developed specifically for refinishing walls and for graphic design and imaging on commercial buildings

Below is an overview of the different systems with links to the detailed instructions and data sheets

Color Repaint Systems

Image Coat 1002

A 100% Water-Based; Base-Coat / Clear-Coat System Using Chem-Bake® 8000 Base Coat and Chem-Clear® WB Clear Coat. For all substrates including wood, masonry and metal.

  • Average Service Life 8-10 years (extendable to 14 plus years)
  • Material cost per 100 sq/ft - As low as $30.00

   [ full system guide]

Composition Acrylic basecoat / Co-polymer clear
Reduction Water
VOC Level Available as low as 150 gpl / 1.2 lb
Sheen level Gloss
Application Temp Range 50°F to 95°F
Dry to handle Basecoat: 1 hour; Clear: 1 hour
Application process duration Single day
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on most painted surfaces
Minimum dry mil thickness Base-coat: 1.5 mil; Clear-coat: 2 mil
Color retention 5
Gloss retention 5
Clean-ability 4
Scratch resistance 4
Hardness 4
Chemical resistance 4
Corrosion resistance 4
Ease of application 4
Ease of touch-up 4
Advanced training required No
Warranty 8 years

Image Coat 1202

A Base-Coat / Clear-Coat System Using Chem-Bake® 8000 Base Coat and Chem-Clear® 2k Clear Coats. For metal and non-porous substrates.

  • Average Service Life 10-12 year (extendable to 18 plus years)
  • Material cost per 100 sq/ft - As low as $35.00

   [ full system guide]

Composition Acrylic basecoat / 2k urethane clear
Reduction Base-coat: water; Clear-coat: acetone
VOC Level Available as low as 100 gpl / .83 lb
Sheen level Gloss
Application Temp Range 50°F to 100°F
Dry to handle Basecoat: 1 hour; Clear: up to 3 hours
Application process duration 2 days
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on most painted surfaces
Minimum dry mil thickness Base-coat: 1.5 mil; Clear-coat 1.5
Color retention 6
Gloss retention 6
Clean-ability 6
Scratch resistance 5
Hardness 5
Chemical resistance 5
Corrosion resistance 4
Ease of application 3
Ease of touch-up 2
Advanced training required No
Warranty 10 years

Door Guard System 1002 - Color Repaint

A 100% Water-Based; Base-Coat / Clear-Coat System Using Chem-Bake® 8000 Base Coat and Chem-Clear® WB Clear Coat.

  • Average Service Life 8-10 year.
  • Material cost per 7x8 door -- As low as $25.00

   [ full system guide]

Composition Acrylic basecoat / Polyurethane co-polymer clear
Reduction Water
VOC Level Available as low as 150 gpl / 1.2 lb
Sheen level Gloss
Application Temp Range 50°F to 95°F
Dry to handle Basecoat: 1 hour; Clear: 1 hour
Application process duration 1 day
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on most painted surfaces
Minimum dry mil thickness Base-coat: 1.5 mil; Clear-coat: 2 mil
Color retention 5
Gloss retention 5
Clean-ability 4
Scratch resistance 4
Hardness 4
Chemical resistance 4
Corrosion resistance 3
Ease of application 4
Ease of touch-up 3
Advanced training required No
Warranty 8 years, extendable to 14

Door Guard 1201 - Color Repaint

A premium single step self-priming DTM two component polyurethane metal finish using Chem-Bake ® 1 Step Polyurethane.

  • Average Service Life 10-12 year.
  • Material cost per 7x8 door - As low as $32.00

   [ full system guide]
Composition 2k DTM acrylic polyurethane
Reduction Reducer or acetone
VOC Level Available as low as 250 gpl / 2.10 lb
Sheen level Gloss
Application Temp Range 35°F to 110°F
Dry to handle Up to 4 hours
Application process duration Single day
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on abraded SMP, test unknown substrates for lifting
Minimum dry mil thickness 3 mil dry
Color retention 5
Gloss retention 5
Clean-ability 6
Scratch resistance 6
Hardness 6
Chemical resistance 6
Corrosion resistance 6
Ease of application 4
Ease of touch-up 3
Advanced training required Yes
Warranty 10 years, extendable to 18

Door Guard 1202 - Color Repaint

A Base-Coat / Clear-Coat System Using Chem-Bake® 8000 Base Coat and Chem-Clear® 2k Clear Coats.

  • Average Service Life 10-12 year.
  • Material cost per 7x8 door -- As low as $27.00

   [ full system guide]
Composition Acrylic basecoat / 2k urethane clear
Reduction Base-coat: water; Clear-coat: acetone
VOC Level Available as low as 100 gpl / .83 lb
Sheen level Gloss
Application Temp Range 50°F to 100°F
Dry to handle Basecoat: 1 hour; Clear: up to 3 hours
Application process duration 2 days
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on most painted surfaces
Minimum dry mil thickness Base-coat: 1.5 mil; Clear-coat 1.5 mil
Color retention 6
Gloss retention 6
Clean-ability 6
Scratch resistance 5
Hardness 5
Chemical resistance 5
Corrosion resistance 4
Ease of application 3
Ease of touch-up 2
Advanced training required Yes
Warranty 10 years, extendable to 18
Clear Coat Systems

Door Restore 2K - Clear Coat

For restoring aging roll doors where the paint has oxidized and is dull or faded but otherwise intact. Solvent-based.

  • Average Service Life 8-12 years
  • Material cost per 7x8 door -- As low as $12.00

   [ full system guide]
Composition 2 component hi-performance acrylic polyurethane clear
Reduction Reducer or acetone
VOC Level Available as low as 40 gpl / .3 lb
Sheen level Gloss
Application Temp Range 40°F to 110°F
Dry to handle Up to 3 hours
Application process duration 1 days
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on most painted surfaces
Minimum dry mil thickness 1.5 mil
Color retention 6
Gloss retention 6
Clean-ability 6
Scratch resistance 5
Hardness 6
Chemical resistance 6
Corrosion resistance 4
Ease of application 4
Ease of touch-up 4
Advanced training required Yes
Warranty 8 years

Door Restore WB - Clear Coat

For restoring aging roll doors where the paint has oxidized and is dull or faded but otherwise intact. Water-based.

  • Average Service Life 5-8 years
  • Material cost per 7x8 door -- As low as $14.00

   [ full system guide]
Composition 100% water borne polyurethane co-polymer
Reduction Water
VOC Level Less than 150 gpl / 1.2 lb
Sheen level Gloss
Application Temp Range 50°F to 95°F
Dry to handle 1-2 hours
Application process duration 1 day
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on most painted surfaces
Minimum dry mil thickness 2 mil dry
Color retention 5
Gloss retention 4
Clean-ability 4
Scratch resistance 4
Hardness 4
Chemical resistance 4
Corrosion resistance 4
Ease of application 6
Ease of touch-up 6
Advanced training required No
Warranty 5 years

Roof Paint System 1201

   [ full system guide]
This is where we will put the content to be expanded #8

Roof Paint System 1202

   [ full system guide]
This is where we will put the content to be expanded #9