Endura-Clad® Coating Systems Selector

visit allfrom1supply.com

Metal Roof Systems

The following Roof Paint Systems have been developed specifically for refinishing SMP coated metal roofs and awnings. These systems are designed for almost every type of situation including new, old, and previously painted roofs.

Knowing there is not a "one size fits all" solution to all scenarios, specific systems have been designed taking into account such things as pitch, potential ponding water, existing substrates, condition of existing coatings, color, desired longevity, climate, time of year being applied, clean-ability, and cost versus benefit return.

These systems are in most cases not a single paint, but a system that includes surface preparation, the appropriate primer if required, and different finish coats and clear protective coatings used in combination to create the final finish. All systems include detailed instructions, expected service life, and warranty.

Below is an overview of the different systems with links to the detailed instructions and data sheets.

Color Repaint Systems

Roof Paint System 801

A Superior Single Component Water-Based System Using Endura-Guard® Single Component Polyurethane Metal Finish

  • Average Service Life 6 year.
  • Material cost per 100 sq/ft - As low as $30.00

   [ full system guide]

Composition 100% water borne polyurethane co-polymer
Reduction Water
VOC Level Gloss: Less than 150 gpl / 1.2 lb, Satin: Less than 180 gpl / 1.5 lb.
Sheen level Gloss and Satin finishes available
Application Temp Range 50°F to 95°F
Dry to handle 1-2 hour
Application process duration Single day
Self-Priming Primer required on new SMP, Self-priming on most other surfaces
Versatility over substrates Self-priming on most previously painted surfaces
Minimum dry mil thickness 2.5 mil
Color retention 4
Gloss retention 4
Clean-ability 4
Scratch resistance 4
Hardness 4
Chemical resistance 4
Corrosion resistance 4
Ease of application 6
Ease of touch-up 6
Advanced training required No
Warranty 6 years

Roof Paint System 1201

A Single Step, Self-Priming DTM Two Component Acrylic Polyurethane System Using Chem-Bake® 1 Step Polyurethane

  • Average Service Life 10 year.
  • Material cost per 100 sq/ft - As low as $45.00

   [ full system guide]

Composition 2k DTM acrylic polyurethane
Reduction Reducer or acetone
VOC Level Available as low as 250 gpl / 2.10 lb
Sheen level Gloss
Application Temp Range 35°F to 110°F
Dry to handle Up to 4 hours
Application process duration Single day
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on abraded SMP, test unknown substrates for lifting.
Minimum dry mil thickness 3 mil dry
Color retention 5
Gloss retention 5
Clean-ability 6
Scratch resistance 6
Hardness 6
Chemical resistance 6
Corrosion resistance 6
Ease of application 4
Ease of touch-up 3
Advanced training required Yes
Warranty 10 years

Roof Paint System 1202

A Base-Coat / Clear-Coat System Using Chem-Bake® 8000 Base Coat and Chem-Clear® 2k Clear Coats

  • Average Service Life 10 year.
  • Material cost per 100 sq/ft - As low as $60.00

   [ full system guide]

Composition

Acrylic basecoat / 2k urethane clear

Reduction Base-coat: water; Clear-coat: acetone
VOC Level Available as low as 100 gpl / .83 lb
Sheen level Gloss
Application Temp Range 50°F to 100°F
Dry to handle Basecoat: 1 hour; Clear: up to 3 hours
Application process duration 2 days
Self-Priming No, Requires bonding primer
Versatility over substrates Can be used over most intact previously coated surfaces
Minimum dry mil thickness 5 mil dry
Color retention 6
Gloss retention 6
Clean-ability 6
Scratch resistance 5
Hardness 5
Chemical resistance 5
Corrosion resistance 4
Ease of application 2
Ease of touch-up 2
Advanced training required Yes
Warranty 10 years

Door Guard 1201 - Color Repaint

A premium single step self-priming DTM two component polyurethane metal finish using Chem-Bake ® 1 Step Polyurethane.

  • Average Service Life 10-12 year.
  • Material cost per 7x8 door - As low as $32.00

   [ full system guide]
Composition 2k DTM acrylic polyurethane
Reduction Reducer or acetone
VOC Level Available as low as 250 gpl / 2.10 lb
Sheen level Gloss
Application Temp Range 35°F to 110°F
Dry to handle Up to 4 hours
Application process duration Single day
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on abraded SMP, test unknown substrates for lifting
Minimum dry mil thickness 3 mil dry
Color retention 5
Gloss retention 5
Clean-ability 6
Scratch resistance 6
Hardness 6
Chemical resistance 6
Corrosion resistance 6
Ease of application 4
Ease of touch-up 3
Advanced training required Yes
Warranty 10 years, extendable to 18

Door Guard 1202 - Color Repaint

A Base-Coat / Clear-Coat System Using Chem-Bake® 8000 Base Coat and Chem-Clear® 2k Clear Coats.

  • Average Service Life 10-12 year.
  • Material cost per 7x8 door -- As low as $27.00

   [ full system guide]
Composition Acrylic basecoat / 2k urethane clear
Reduction Base-coat: water; Clear-coat: acetone
VOC Level Available as low as 100 gpl / .83 lb
Sheen level Gloss
Application Temp Range 50°F to 100°F
Dry to handle Basecoat: 1 hour; Clear: up to 3 hours
Application process duration 2 days
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on most painted surfaces
Minimum dry mil thickness Base-coat: 1.5 mil; Clear-coat 1.5 mil
Color retention 6
Gloss retention 6
Clean-ability 6
Scratch resistance 5
Hardness 5
Chemical resistance 5
Corrosion resistance 4
Ease of application 3
Ease of touch-up 2
Advanced training required Yes
Warranty 10 years, extendable to 18
Clear Coat Systems

Door Restore 2K - Clear Coat

For restoring aging roll doors where the paint has oxidized and is dull or faded but otherwise intact. Solvent-based.

  • Average Service Life 8-12 years
  • Material cost per 7x8 door -- As low as $12.00

   [ full system guide]
Composition 2 component hi-performance acrylic polyurethane clear
Reduction Reducer or acetone
VOC Level Available as low as 40 gpl / .3 lb
Sheen level Gloss
Application Temp Range 40°F to 110°F
Dry to handle Up to 3 hours
Application process duration 1 days
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on most painted surfaces
Minimum dry mil thickness 1.5 mil
Color retention 6
Gloss retention 6
Clean-ability 6
Scratch resistance 5
Hardness 6
Chemical resistance 6
Corrosion resistance 4
Ease of application 4
Ease of touch-up 4
Advanced training required Yes
Warranty 8 years

Door Restore WB - Clear Coat

For restoring aging roll doors where the paint has oxidized and is dull or faded but otherwise intact. Water-based.

  • Average Service Life 5-8 years
  • Material cost per 7x8 door -- As low as $14.00

   [ full system guide]
Composition 100% water borne polyurethane co-polymer
Reduction Water
VOC Level Less than 150 gpl / 1.2 lb
Sheen level Gloss
Application Temp Range 50°F to 95°F
Dry to handle 1-2 hours
Application process duration 1 day
Self-Priming Yes, on properly prepared surfaces
Versatility over substrates Self-priming on most painted surfaces
Minimum dry mil thickness 2 mil dry
Color retention 5
Gloss retention 4
Clean-ability 4
Scratch resistance 4
Hardness 4
Chemical resistance 4
Corrosion resistance 4
Ease of application 6
Ease of touch-up 6
Advanced training required No
Warranty 5 years

Roof Paint System 1201

   [ full system guide]
This is where we will put the content to be expanded #8

Roof Paint System 1202

   [ full system guide]
This is where we will put the content to be expanded #9